Wheel & tyre wash
Stop tracking mud and dust off your site.
Automatic wheel-wash systems that keep haul roads, public roads and neighbours clean — and keep you on the right side of dust and effluent regulations.
The problem
Dirty wheels are a compliance risk
Mud and dust carried onto public roads triggers council complaints, fines and — increasingly — site shutdowns.
- Dust & mud on public roads → fines and stop-work orders
- Neighbour and council complaints
- Manual hosing wastes water, time and labour
The KKE solution
Clean every wheel, reclaim every litre
Drive-through and rollover wheel-wash systems with closed-loop recovery, sized to your dirt load.
- Up to 90% water recovery & recycling
- Portable systems install in a single workday — no deep civils
- Automatic operation, built for haul trucks and heavy plant
90%
water recovered & recycled
10+/hr
trucks cleaned
1 day
to install (portable)
0
deep civils on portable rigs
Range
TW610 wheel-wash range
| Model | Bay length | Water recovery | Best for |
|---|---|---|---|
| TW610 8.4 | 4 m | Up to 90% | Single rotation, lighter soil |
| TW610 20.4 | 4 m | Up to 90% | Higher throughput sites |
| TW610 40.8 | 8 m | Up to 90% | Sticky soil, ~2.5 rotations |
“Since installing KKE wheel wash, road-cleaning complaints dropped to zero and we cleared our compliance audit.”
FAQ
Wheel-wash questions, answered
How much water does it use?
With closed-loop recovery, systems reuse up to 90% of wash water, so top-up demand is minimal.
Do I need civil works?
Portable above-ground systems install in a single workday with no deep foundations. Permanent concrete configurations are available for long-lease sites.
What vehicles can it handle?
From light commercial to haul trucks, dumpers and heavy plant — nozzle and pump sizing matches your dirt load.
Get started
Get a wheel-wash compliance consult
Tell us about your site and we'll recommend the right configuration.